Friday, 31 December 2010
Wednesday, 29 December 2010
You can pop along to www.lulu.com/product/paperback/improving-classic-motorcycles/12932659 to buy yourself that extra little Christmas pressie. Take it away Graham B....
Hopefully you’ve all equipped yourselves with a Vee Wipe to keep the outside of your visor clear in rain. But what about the inside of the visor and the constant battle with it misting up from your breath?
I’ve been riding year round for just short of 33 years now and have tried pretty much everything to stop misting up. My case is particularly tough because I wear contact lenses which require a well fitting visor that doesn’t let the wind in. When wearing contact lenses (well the hard type I use anyway) the slightest spec of dust that gets in your eye causes an “I’ve just been chopping up the strongest onions known to man” effect. The sort of dust that that would just make someone not wearing lenses blink a couple of times can have you struggling to see the road ahead.
Very rarely I wear glasses instead but I am very aware of the lens frames and feel
that glasses restrict my peripheral vision. So. A draft free visor is good at keeping rubbish out of your eyes and is also good at reducing wind noise and protecting your hearing. But it makes visor misting up worse. I tried a few of the solutions you apply to the inside of the visor but found that washing up liquid (the one that’s kind to your hands!) worked as well if not better. All of them wore off after one or two rides so it was a time consuming routine taking off the visor and retreating it every time I went out. They also gave a rainbow effect across the visor as breath settled on them. Not great.
I noticed that GBC’s equally gorgeous sister <
The idea is quite clever. A layer of air is trapped between the stick on sheet and the visor and they work just like double-glazed windows in that they don’t steam up as much. The seal around the periphery is critical so you have to apply them very carefully to an absolutely spotlessly clean visor. And it is a once only operation so make sure you get the positioning right first time. If that glued down peripheral seal is broken they stop working as well.
These may be your best bet if you wear glasses while riding. However they also suffer from the rainbow effect and the glued edge restricts peripheral vision. In some helmets, they may foul the visor seat rubber seal as the visor is opened and closed. They are not as scratch resistant as the visor itself and must be treated with care to avoid your view being marred by scratches.
Respro Foggy mask
I must state that I have no connection with the manufacturer or anything to
gain by singing their praises. But in my view this a good solution to the visor
misting problem and thus a safety aid. It can’t be used on an open face helmet because there’s no chin piece to stick to. I found it difficult to use with glasses but you may have better luck than me if you persevere. Glasses sit on top of the nose piece and bounce up and down I’ve found – which is really distracting.
Fitting the Foggy
Supplied is one half of a velcro patch that is to be stuck to the chin bar of the helmet. I suggest you rehearse fitting the mask with the velcro patch hooked up to the mask but with the peel off layer still covering the sticky stuff. Try the helmet
on for fit. Then mark exactly where the sticky side of the velcro is to go.
To say that it sticks like glue is an understatement! You must get it in the right place first go because there will be no second attempt. In removing it the glue is ripped apart and will never stick as well again.
Spend a lot of time on the rehearsal before fitting the sticky patch and go look at yourself in the mirror with the helmet on with mask fitted. It should be a comfortable fit and easy to get the helmet on and off. When removing the helmet I find pulling the bridge of the nose piece forwards helps. Also look for gaps between the mask and your cheeks and adjust it so there are no gaps. The sticky velcro patch has loops whereas the three patches of velcro on the mask itself have hooks. These hooks cling really well to the fabric of the helmet’s cheek pads and the position of the sides of the mask can be fine tuned to give the best fit. I try to fit the mask so it follows the contours of the chin bar and cheek pads viewed from underneath so no breath gets past it.
Don’t buy anything other than the black one. I had a blue one first with a silver strip of metal that holds the curve over the bridge of the nose. This reflected annoyingly in the visor. I’ve also drawn over the maker’s (originally white) logo with black biro to stop it reflecting in the visor.
While we’re talking helmets, I have a chin cover that slips in between the helmet lining and shell. It’s remarkable how much warmer my chin is in winter with this little device fitted.
Thursday, 23 December 2010
What are your plans for next year?
How about a pic of the finished beast to complete the set??
Tuesday, 21 December 2010
Wednesday, 15 December 2010
Tuesday, 14 December 2010
No, I'm not saying beware of the pre-Xmas competition, I'm saying, that there is a competition, now, pre-Xmas, and the aim is to guess what the sign is warning you of. Geddit? This sign is situated at Cubbie Towers, just as you come down the drive, and until a few days ago was under a weeny bit of snow, as you can see. So what do you think it's warning the unwary visitor of? Anyone who has been to the Towers and seen the sign is NOT allowed to enter and if I find out that you are entering and cheating I will chop your fingers off, slowly!
So, send your guesses in to comp AT aultan.com (yeah, change the AT to @!)
Sunday, 12 December 2010
Load the barrow up and dish the hay out to Horse and the sheep in four different fields...
Looby-Lou saying she didn't get enough hay!
Time for a pretty picture along the way...
The little lambies scramble to get a place at the hay rack...
Thursday, 9 December 2010
I was also looking at 'mobile blogging' through the Blogger site, to see if that might be the answer, but all it seems to be directing me to do is to register so that I can then send mobile posts to my 'new' blog. Well, I don't want a new blog thank you very much, I would just like my old one to accept posts from my Blackberry, is that too much to ask?
I'm probably going to go and spoil it all now by connection (using a wire) my BB to my pooter so that I can share some video footage I took the other night on my way home from work and get all the pics off that I keep snapping. Wish me luck....I might be right back with a vid for you, or I might not...
The Really REALLY good news, is that PHIL MATHER has agreed to be the HEAD JUDGE again for the Blog Winter Photo Competition. I've yet to think of a suitable topic, but I'm sure something will pop into my head soon, so make sure you pop back to check on the blog, and take your camera or moby phone with you on all outings from now on, so that you can capture that magic moment that might just fit into the comp category.
Right, BB is plugged in and away we go....
Monday, 6 December 2010
Sunday, 5 December 2010
The temp at Cubbie Towers, early evening on 2nd Dec, I'm sure if I'd gone out to the truck and check the temp later on, it would have beaten Moscow and Meigle, but d'you know what, it was too cold to go outside!
Saturday, 27 November 2010
Anyway, loving the BB and getting used to all the 'apps' and so on, got some lovely snowy pics for you too. Let's be having YOUR snowy pics perlease!
Tuesday, 23 November 2010
UPDATE, or should I say, DOWNdate. Johny, owner of the Hobart, has reported about 4" of snow over in his neck of the woods out west, so we've agreed to postpone Hobart Day. I hope this isn't going to be like Groundhog day....